Product Description
Additional Information
Reviews (0) Questions (0)
| SPECIFICATIONS | |
| Brand | Gigabyte |
| Series | Ultra Durable |
| Model | H310M S2V 2.0 (rev. 1.0) |
| CPU | Support for 9th and 8th Generation Intel Core i9 Processors/Intel Core i7 Processors/Intel Core i5 Processors/Intel Core i3 Processors/Intel Pentium Processors/Intel Celeron Processors in the LGA1151 Package |
| L3 Cache Varies with CPU | |
| Chipset | Intel H310 Express Chipset |
| Memory | 2x DDR4 DIMM Sockets Supporting Up to 32 GB of System Memory |
| Dual Channel Memory Architecture | |
| Support for DDR4 2666/2400/2133 MHz Memory Modules | |
| Support for ECC Un-Buffered DIMM 1Rx8/2Rx8 Memory Modules (Operate in Non-ECC Mode) | |
| Support for Non-ECC Un-Buffered DIMM 1Rx8/2Rx8/1Rx16 Memory Modules | |
| Support for Extreme Memory Profile (XMP) Memory Modules *1 | |
| On-Board Graphics | Integrated Graphics Processor-Intel HD Graphics Support: |
| 1x D-Sub Port, Supporting a Maximum Resolution of 1920x1200@60 Hz | |
| 1x DVI-D Port, Supporting a Maximum Resolution of 1920x1200@60 Hz *2 | |
| Maximum Shared Memory of 1 GB | |
| Audio | Realtek ALC887 Codec |
| High Definition Audio | |
| 2/4/5.1/7.1-Channel *3 | |
| LAN | Realtek GbE LAN Chip (10/100/1000 Mbit) |
| Expansion Slots | 1x PCI Express x16 Slot, Running at x16 |
| (The PCIEX16 Slot Conforms to PCI Express 3.0 Standard.) | |
| 1x PCI Express x1 Slot | |
| (The PCI Express x1 Slot Conforms to PCI Express 2.0 Standard.) | |
| Storage Interface | Chipset: |
| 4x SATA 6Gb/s Connectors | |
| USB | Chipset: |
| 4x USB 3.1 Gen 1 Ports (2 Ports on the Back Panel, 2 Ports Available Through the Internal USB Header) | |
| 6x USB 2.0/1.1 Ports (4 Ports on the Back Panel, 2 Ports Available Through the Internal USB Header) | |
| Internal I/O Connectors | 1x 24-pin ATX Main Power Connector |
| 1x 4-pin ATX 12V Power Connector | |
| 4x SATA 6Gb/s Connectors | |
| 1x CPU Fan Header | |
| 1x System Fan Header | |
| 1x Front Panel Header | |
| 1x Front Panel Audio Header | |
| 1x USB 3.1 Gen 1 Header | |
| 1x USB 2.0/1.1 Header | |
| 1x Serial Port Header | |
| 1x Speaker Header | |
| 1x Chassis Intrusion Header | |
| 1x Clear CMOS Jumper | |
| Back Panel Connectors | 1x PS/2 Keyboard/Mouse Port |
| 1x D-Sub Port | |
| 1x DVI-D Port | |
| 2x USB 3.1 Gen 1 Ports | |
| 4x USB 2.0/1.1 Ports | |
| 1x RJ-45 Port | |
| 3x Audio Jacks | |
| I/O Controller | iTE I/O Controller Chip |
| H/W Monitoring | Voltage Detection |
| Temperature Detection | |
| Fan Speed Detection | |
| Overheating Warning | |
| Fan Fail Warning | |
| Fan Speed Control *4 | |
| BIOS | 1x 128 Mbit Flash |
| Use of Licensed AMI UEFI BIOS | |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
| Operating System Support | Windows 10 64-bit |
| Form Factor | Micro ATX Form Factor; 19.0cm x 17.4cm |
| Notes | *1 To support 2666 MHz or XMP memory, you must install an 8th Generation Intel Core i7/i5 processor. |
| *2 The DVI-D port does not support D-Sub connection by adapter. | |
| *3 To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. | |
| *4 Whether the fan speed control function is supported will depend on the cooler you install. | |
| Warranty Information | |
| Warranty | 3 Year Warranty |
| Manufacturer's Site | Visit the manufacturer's website |
|---|---|
| Product Link | Visit the manufacturer's page for this product |
Questions
Ask a Question
No questions yet. Be the first to ask!
