| SPECIFICATIONS | |
| Brand | Phanteks |
| Series | Glacier One |
| Model | Glacier One 280 MP (PH-GO280MP_DBK01) |
| Specifications | |
| Supported Sockets | Intel: 115x / 1200 / 1366 / 2011 / 2011-v3 / 2066 |
| AMD: AM5/ AM4 / sTRX4* / TR4* | |
| *Threadripper bracket included with CPU | |
| Coldplate Material | Copper |
| Colour | Black |
| Pump | |
| Pump Speed | 2800 RPM +/- 300 (with 100% duty cycle) |
| Up to 3600 RPM with Out-of-Bound temperature sensing | |
| Pump Control | PWM |
| Pump PWM Cable Length | 245 mm |
| Power | 12V, 0.3A, 3.6W |
| Bearing | Ceramic bearing and shaft |
| Material | Copper, ABS plastic |
| Noise | 27 dBA |
| MTTF | 50,000 hours (typical use) |
| Cooling Liquid | Distilled water and Propylene Glycol mix |
| Thermal Paste | 4.5 W/m-k Pre-applied + Phanteks PH-NDC |
| Dimensions | 93 x 92 x 41 mm (LxWxH) |
| Infinity Mirror Cap | |
| D-RGB Style | Infinity mirror (tempered glass window) |
| D-RGB Type | 3-Pin Digital RGB LED strip (5V, data, ground) |
| LED Quantity | 14x LED Chips |
| D-RGB 3-Pin Cable Length | 5V, 0.42A, 2.1W |
| Power | 550 + 75 mm, daisy chain connector |
| Material | Tempered Glass, ABS Plastic |
| Tubes | |
| Length | 400mm |
| Outer Diameter | 11mm OD |
| Material | EPDM Rubber with black braided sleeves |
| Tube Clips | 3x Total |
| Fittings | Rotary Type |
| Fan Specifications | |
| Bearing Type | UFB (Updraft Floating Balance) Bearing |
| Blade Geometry | Seven blade design |
| Rated Voltage | DC 12V |
| PWM | Yes |
| Input Current | 0.23A |
| Input Power | 2.76W |
| Speed | 500 - 2000 +/-10% RPM |
| Max. Airflow | 24.3 - 93.05 CFM |
| Max. Air Pressure | 0.23 - 3.59 mmH2O |
| Noise Level | 18 - 39.1 dBA |
| Fan Connector | 4-Pin |
| Cable Length | 145mm Daisy-chain + 500mm extension cable |
| MTBF | 150,000 hours |
| Dimensions | 140 x 140 x 25 mm (LxWxH) |
| Radiator Specification | |
| Dimensions | 313 x 140 x 27 mm (WxHxD) |
| Material | Aluminium |
| FPI | 21 |
| Features | |
| Infinity Mirror Cap | Clean full cover design with easy and secure magnetic mounting |
| Tempered glass window with smooth and diffused D-RGB lighting | |
| Silent MP PWM Fans | High surface area fan blades for high pressure performance |
| Aerodynamically optimised for silent operation | |
| Cooled by Asetek | Gen 7 Asetek AIO platform delivers the best-in-class performance |
| Pump PWM control to optimise pump speed for acoustics and performance | |
| Out-of-bound temperature sensing enables the pump speed to automatically boost up to 3600 RPM when liquid temperature is above 60°C | |
| Built-in safety curve feature to ensure the liquid temperature stays within limits (60°C) for normal safe operation | |
| Maximum Clearance | Low profile pump cap for reduced height |
| Rotary fittings are located close to the pump to maximize RAM clearance | |
| Intuitive Installation | Compatible with all common Intel and AMD Sockets |
| Toolless and intuitive mounting system | |
| Thermal compound is pre-applied and comes included with an additional PH-NDC thermal compound for future re-installation | |
| Flexible tubing with durable braided sleeving | |
| 3x Tube Clips included to guide the tubing and fan cable for a clean and tidy case interior | |
| General | |
| Package Contents | Glacier One 280 MP cooler |
| Infinity Mirror Cap | |
| 280mm Radiator | |
| 2x 140mm MP fans | |
| 4-Pin PWM Splitter cable, 2x 80mm | |
| 4-Pin Fan PWM extension cable, 500mm | |
| 3-Pin D-RGB Motherboard adapter, 600mm | |
| PH-NDC Thermal compound | |
| 3x Tube clips | |
| Intel 115x / 1200 / 1366 backplate | |
| AMD AM4 Bracket (Intel bracket is pre-installed) | |
| 4x AM4 Stand-off | |
| 4x 115x/1200 Stand-off | |
| 4x 2066 Stand-off | |
| 4x Thumb nut | |
| 8x/12x 31mm Fan screws | |
| 8x/12x 5mm Radiator screws | |
| 8x/12x Washers | |
| Warranty Information | |
| Warranty | 6 Year Warranty |
| Manufacturer's Site | Visit the manufacturer's website |
|---|---|
| Product Link | Visit the manufacturer's page for this product |
- Great Cooler - Vuk, 28 April 2022
Paired it to a 3700X and am really happy. Stress testing using super pi, temps never went above 65c. Ran for an hour.
Highly recommend. - Works well with everything you need in it - Wayne, 15 December 2021
Works well with all the parts needed including extra heat past. The only issue is the RGB shrowd does not clip-on, but rests in place. So if you move the case it tends to fall off.
- Great cooler for the money! - Kyle, 29 September 2021
Looks great - subtle but sleek design
Good quality - feels very solid with everything very neatly assembled and packaged
Nice RGB - RGB isn't over the top and looks very crisp. Connected in daisy-chain with other Phanteks items with no issue
Solid thermal performance with no noise - Gaming temps on my 5800X have come down by about 10C compared to previous air cooler (Phanteks PH-TC14PE).
Thermals under full load are MUCH better as well.
Quite a bit cheaper, especially when on sale, when compared to similarly spec'd alternatives out there.
Switched out the fans for RGB Phanteks units and the cooler looks even more impressive now.
Questions
Ask a Question
No questions yet. Be the first to ask!
