ID-Cooling FROZN A610 BLACK 120mm Single-Tower Black PWM CPU Cooler

I bought this cooler for my 7500F after using the stock Wraith Stealth cooler, which wasn't enough to keep the temperature under control.

The difference was immediately noticeable. My temperatures dropped a lot, and the whole system became much quieter under load.

The cooler itself feels solid and looks good in all black. Installation was easy and it fit well without any issues, just remember to pop the top cover off of the heatsink to mount it easily. For the price, the cooling performance is excellent and it's much better value than spending a lot more on an AIO for a low power CPU like my 7500F.

Overall, if you are unhappy with the stock cooler temperatures, this is a worthwhile upgrade.

Upgraded from a smaller Antec A40. This cooler has dropped my CPU temps by a whopping 10 degrees C. It comes with the one fan, but you can clip another onto the back with the provided clamps.

On the special it was cheaper than a lot of smaller coolers, and even the full price isn't outlandish. If you aren't looking for RGB, this is a good cooler for the 9600X I attached it to.

It has a flaw where to screw down the one side you are basically forced to bend the fins ever so slightly to get the screw driver in.

So my unit was missing the installation guide, which made it incredibly difficult with installing it. Since there are parts to install on Intel as well as AMD. I tried searching for a PDF copy of the guide had no luck there and then so ended up searching google for a video guide, 90% of the results were are for intels cpus. I eventually found a video guide going over how to install for AMD's AM4 socket. Apart from the struggles with the missing installation guide, I would have loved to know it comes with paste as well would have saved myself some bucks and not gotten some thermal paste. Long story short it works WAY better than the stock AMD cooler, mine used to idle at 50 degrees at stock and with the new cooler its sitting at 37 to 40 degrees which is a massive change. Worth it not to worry about my system overheating while I game

I bought this cooler on recommendation from the wootware site when i was building my new Am5 9800 x3d build .
the Cooler is quite large but in large cases fits well - construction is well made and the cooler is of a premium quality.

installation for AM5 was very simple, put the orange grommets under the am5 brackets, secure the am5 mounting bracket on top , install cpu and paste the CPU, and the install the cooler, overall simple to install.

performance for this air cooler is very good on am5 9800x3d, air temps on idle around 38 degrees and under load goes up to about 78 degrees, while constantly gaming the temps are stable at around 67 degrees .

the cooler is very solid and the cooler does not feel like it will come lose over time .

The fan clips onto the heatsync chassis of the cooler with clips and you can offset the height of the fan for clearance above the ram modules, on the lowest setting the XPG low profile ram has plenty clearance under the cooler to fit

The included heatsink paste is quite thick and tacky , but goes on nicely giving an even coverage and overall very impressed with this having been a user of thermal Grizzly

Overall very happy with this CPU cooler and a solid choice for Am5.

the only downside is the RGB connector for the top of the Cooler fan is not included in the box however this was not an issue for me as i my case sits under a desk where i would not see the rgb.

I bought this cooler on recommendation from the wootware site when i was building my new Am5 9800 x3d build .
the Cooler is quite large but in large cases fits well - construction is well made and the cooler is of a premium quality.

installation for AM5 was very simple, put the orange grommets under the am5 brackets, secure the am5 mounting bracket on top , install cpu and paste the CPU, and the install the cooler, overall simple to install.

performance for this air cooler is very good on am5 9800x3d, air temps on idle around 38 degrees and under load goes up to about 78 degrees, while constantly gaming the temps are stable at around 67 degrees .

the cooler is very solid and the cooler does not feel like it will come lose over time .

The fan clips onto the heatsync chassis of the cooler with clips and you can offset the height of the fan for clearance above the ram modules, on the lowest setting the XPG low profile ram has plenty clearance under the cooler to fit

The included heatsink paste is quite thick and tacky , but goes on nicely giving an even coverage and overall very impressed with this having been a user of thermal Grizzly

Overall very happy with this CPU cooler and a solid choice for Am5.

the only downside is the RGB connector for the top of the Cooler fan is not included in the box however this was not an issue for me as i my case sits under a desk where i would not see the rgb.

Had a stock cooler installed with an Intel 8400K and it would run HOT. WIth the FROZN cooler my CPU idles at 40 degrees and maxes out at ~65 when playing demanding games. Easy to install, didn't take too long. Recommend this cooler if you have a semi-demanding machine.

This cooler impressed me greatly with ease of installation as well as performance.
I paired it with a AMD 5700g, and it runs near silent and keeps temps way under their limits.
Due to it's relatively compact size, I had no clearance issues using this on a ASUS TUF B550 MB.

I purchased this cooler as a replacement for an older 240mm AIO on my Ryzen 3600 CPU,and I am very impressed! From the packaging, through to the quality of the actual product and the performance, this was well above my expectations for this price point. I included an additional matching ID-Cooling AF-125-K 120mm fan in a Push/Pull configuration and as a result my idle temps are around 36 degrees and 68 degrees under load in the summer months with the fans running at a maximum of 1050 rpm and 600 rpm at idle.

As a bonus, the All black finish with small white accents, looks great!